Question New and old ram not showing display

[Lonaax]

Hello.

So I recently got new ram to pop into my computer. I used the pcpartpicker to find some that was compatible with my current motherboard and graphics card.

My old ram was 8gb and was 2666mhz

I bought two 16gb 3200mhz ram (my motherboard says thats what it can go up too)

After taking out the old ram and replacing with the new one I noticed the screen wasn't turning on. I tried to connect it via my graphics card and motherboard and had zero luck. The computer turns on and doesn't have any strange noises or lights showing.

I then tried the old ram stick in the same slot it was in before to see if it would load up. It doesn't. I've not moved any wires or touched anything else other than my ram.

I tried the old ram in both slots and I also tried one stick of the new ram in both slots and nothing seems to be showing up on the screen at all.

I'm at a loss of what to do.

Any help would be greatly appreciated.

Thanks!

 

[Dark Lord of Tech]

Specs?

 

[punkncat]

Make sure the new sticks are in the correct slots and fully seated.

Reset CMOS. If you don't know how, check your PC documentation.

See if system will boot.

If it does, then check how to load into BIOS and set XMP.

As above, specs are very helpful for troubleshooting.