New Asus P8Z68-V PRO/GEN3 No post

Status
Not open for further replies.

AzureLightPKK

Honorable
May 12, 2012
16
0
10,510
I am a new builder and this is my first built. I recently purchased the Asus P8Z68-V PRO/GEN3 motherboard along with a 3rd gen 17 3770K and some GSkill Ripjaw X ram. I am unable to post and there is no video output at all. The CPU led would light up for a second along with the Memok/DRAM led. The DRAM led would blink a few times and the PSU would shut off.

Mobo - Asus P8Z68-V PRO/GEN3
Ram G.SKILL Ripjaws X F3-17000CL9D-8GBXM (2x4gb)
PSU F3-17000CL9D-8GBXM

Ignoring the other component's as I'm trying to breadboading it first. I suspect the problem to be the RAM but the PSU would shut off after the DRAM led blinks a few times instead of being a solid red. I can't use the MEMok feature in the situation.
 
Solution
I had the same problem. It's because the BIOS isn't up to date for the ivy bridge CPU. You should update the BIOS to 3304, that will fix the problem.

Niels87

Honorable
May 9, 2012
16
0
10,520
I had the same problem. It's because the BIOS isn't up to date for the ivy bridge CPU. You should update the BIOS to 3304, that will fix the problem.
 
Solution
Status
Not open for further replies.