Question New build booted once but now won’t

[Strayer_]

Me and my friend are currently building this PC, we finished building and booted it up. After a few seconds it booted to BIOS, and I set the XMP profile and restarted it. But the problem is it didn’t come back on. I did notice immediately that the cpu power cord was slightly unplugged so I fixed that. The PC will boot up but won’t display anything, and the EZ Debug light is white next to the CPU. Is there anything I should do or try to fix it?

 

[bobbyturtle]

looking into the manual from your motherboard the EZ debug LED next to the CPU says there is no CPU detected. This makes me think that you may have fried the CPU from not having the power cable in all the way.

https://imgur.com/HcHgN5d

View: https://imgur.com/HcHgN5d


If this is not the case I would look at the website of your motherboard and make sure you don't need a bios update for your CPU. Or maybe try booting with your XMP profile disabled.

 

[kurdtnz]

On the motherboards box, did it say 'ryzen 3000 ready' or 'ryzen 5000 ready?' As suggested above, sounds like you may need to update the BIOS for the 5600.