New build BSOD memory help

[Zoid13erg]

So I've just completed my first build ever and I installed windows 10 and I am starting to run into some BSOD errors. The first was ATTEMPTED WRITE TO READONLY MEMORY. the second which I have got twice now is memory management BSOD. any ideas on what it could be? I'm running prime 95 but it appears that if I have too many applications open ( especially YouTube) it crashes

I have a new i5 6500 with DDR4 16GB RAM. Is this too much memory, is the voltage not good, is my new memory back? Or is my software bad

 

[harryfishrules]

So I've just completed my first build ever and I installed windows 10 and I am starting to run into some BSOD errors. The first was ATTEMPTED WRITE TO READONLY MEMORY. the second which I have got twice now is memory management BSOD. any ideas on what it could be? I'm running prime 95 but it appears that if I have too many applications open ( especially YouTube) it crashes

I have a new i5 6500 with DDR4 16GB RAM. Is this too much memory, is the voltage not good, is my new memory back? Or is my software bad

First of all, could you work through this checklist please: http://www.tomshardware.co.uk/forum/261145-31-perform-steps-posting-post-boot-video-problems it is made to help with problems when there is no output from the PC whatsoever but it might help.

It's made by the Moderators here and covers most bases so it's important to carry out every step.

Also, could you carry out these steps as well:

1. Press "Windows + R" at the same time
2. Enter "control wuaucpl.cpl" (without speech marks) followed by enter
3. Select "Scan for Updates"
4. Install all updates including optional ones

5. Restart your PC into the normal desktop

6. Restart your PC into Safe Mode

7. Press "Windows + X" at the same time
8. Select “Command Prompt (Admin)
11. Enter "sfc /scannow" (without the speech marks) into Command Prompt followed by enter
12. Let the scan complete

Let me know how this goes.