Question New build BSOD troubleshoot

extra_g

Honorable
Mar 29, 2015
11
0
10,510
0
I just built a PC (upgraded actually), not my first and have encountered the dreaded BSOD. It can happen during Windows install and will most definitely happen when I launch MW.
What I have done in regards to troubleshooting is,
Removed all drives and cards and only had MB,CPU,RAM,PSU and System disk connected.
Tried installing OS on various drives. (Still BSOD)
Tried RAM from another healthy PC. (Still BSOD)
That leaves the PSU (has never shown issue before the upgrade), the CPU and MB
I am leaning toward the MB.

The most common error I get is "page fault in non page area".

Which do you think it would most likely be?
 

jay32267

Champion
Is that all the info available?

Cooler Master makes some good and bad units.

If it's any of these.....I would question it.

Cooler Master | GX 2010 [RS-ACAA-D3 ] - GXII - MWE V1 Bronze [MPW] / V1 White [MPX] <=550W - Masterwatt Lite - Silent Pro M2 <=620W
Cooler Master | Elite - Realpower - B2

See here>>
 

extra_g

Honorable
Mar 29, 2015
11
0
10,510
0
More to the story.
What i noted is that the BSOD would only happen after Windows setup asked to login to the network. After that step the BSOD would be random but was certain when MW was launched.
The CPU is an i5 11400 on a GigabyteAorus b560 AX pro.

A couple of hours ago I did another clean install of Windows but this time at the point of entering the network details I press no connection available and finished the install without internet connection. The PC has not encountered a BSOD yet and is fast and stable.
Problem is I can't do nuch without internet :(
 

ASK THE COMMUNITY