New build, computer turns on but monitor says no signal

[tablemon1]

This is my first build and I'm a newbie to all this so I seriously don't know what's wrong with it please help
All the leds turn on and all fans run, the motherboard has debug leds built in that light up when something's wrong or not connected but they're all off. The monitor I'm trying to use is the HP 22fw Display and I've tried HDMI and DVI from both the motherboard and the GPU.

msi B250M Mortar Motherboard
intel Pentium Gold CPU
T-Force DDR4 Vulcan 16GB RAM
Corsair CX650 PSU
Gigabyte Silent Low Profile 2G GeForce GT 1030 GPU
Seagate 2TB BarraCuda HDD
Corsair Carbide Series SPEC-04 Case

 

[cin19]

msi B250M Mortar Motherboard
intel Pentium Gold CPU

If you had one of those Pentium Gold CPU, https://ark.intel.com/products/series/129958/Intel-Pentium-Gold-Processor-Series Your MB does not support the cpu, you need the 300 series MB ( like the B360M) for the Pentium Gold CPU.

 

[tablemon1]

msi B250M Mortar Motherboard
intel Pentium Gold CPU

If you had one of those Pentium Gold CPU, https://ark.intel.com/products/series/129958/Intel-Pentium-Gold-Processor-Series Your MB does not support the cpu, you need the 300 series MB ( like the B360M) for the Pentium Gold CPU.

Oh damn, that would be why thank you so much. Would you have any recommendations for the CPU for the B250M?

 

[cin19]

Because you try to use the Pentium Gold CPU, so I recommend you can buy the Pentium G4620 or G4560, our site has the review: https://www.tomshardware.com/reviews/intel-pentium-g4620-g4560-cpu,4934.html

Or go to the MSI site for the cpu support list: https://www.msi.com/Motherboard/support/B250M-MORTAR#support-cpu to find the cpu.