New build doesn't start at all

[FalconWorks]

Hello, first of all, sorry if I chose a wrong [strike]thread[/strike] forum.

I am just building my friends computer, I double checked all connections according to all manuals etc. When I press "start button", there is a really short flash (like less than half a second) of red light from EZ Debug on Tomahawk B350, nothing runs, no fans, no front panel light, nothing.

I am getting desperate and ran out of options. Actually thinking about sending it for a repair or something.

Anyways, the build specs:
https://www.czc.cz/4118367800/objednavka

Hope you don't mind the site is Czech, it's the list as I ordered it.

Also tried changing RAMs, one RAM only.. Also took out the GPU. Connected speaker, it doesn't do any sound at all.

Thanks for any help..

 

[Kasper Jorgensen]

Cannot see any specs on your link, and also don't understand that language. Could you please write the specs here in english?

With that said, it sounds like a PSU problem, which PSU did you install?

 

[FalconWorks]

Cannot see any specs on your link, and also don't understand that language. Could you please write the specs here in english?

With that said, it sounds like a PSU problem, which PSU did you install?

Oh, sorry to hear that, it worked when I tried it on my phone.. Here they are:

MSI B350 TOMAHAWK - AMD B350
AMD Ryzen 3 1200
Fortron HYDRO 500W
Kingston HyperX Fury Black 8GB (2x4GB) DDR4 2400

ASUS ROG-STRIX-RX560-4G-GAMING, 4GB GDDR5
Seagate BarraCuda - 1TB
SilentiumPC Fera 3 HE1224 v2 (CPU Cooler)

And thanks for your answer.

 

[Kasper Jorgensen]

Cannot see any specs on your link, and also don't understand that language. Could you please write the specs here in english?

With that said, it sounds like a PSU problem, which PSU did you install?

Oh, sorry to hear that, it worked when I tried it on my phone.. Here they are:

MSI B350 TOMAHAWK - AMD B350
AMD Ryzen 3 1200
Fortron HYDRO 500W
Kingston HyperX Fury Black 8GB (2x4GB) DDR4 2400

ASUS ROG-STRIX-RX560-4G-GAMING, 4GB GDDR5
Seagate BarraCuda - 1TB
SilentiumPC Fera 3 HE1224 v2 (CPU Cooler)

And thanks for your answer.

Well, it is for sure a cheap shitty, crappy and not safe PSU you got yourself there. Do you have any other PSU you can install to test with?

 

[FalconWorks]

Cannot see any specs on your link, and also don't understand that language. Could you please write the specs here in english?

With that said, it sounds like a PSU problem, which PSU did you install?

Oh, sorry to hear that, it worked when I tried it on my phone.. Here they are:

MSI B350 TOMAHAWK - AMD B350
AMD Ryzen 3 1200
Fortron HYDRO 500W
Kingston HyperX Fury Black 8GB (2x4GB) DDR4 2400

ASUS ROG-STRIX-RX560-4G-GAMING, 4GB GDDR5
Seagate BarraCuda - 1TB
SilentiumPC Fera 3 HE1224 v2 (CPU Cooler)

And thanks for your answer.

Well, it is for sure a cheap shitty, crappy and not safe PSU you got yourself there. Do you have any other PSU you can install to test with?

Oh, well I can take out the one I have in my computer, even though it's quite old. And also, shitty, sadly.
I had a quite tight budget, so I had to go with a certain price range, in which it was the best.. Well, at least on paper.. I guess that's it then, hehe.

I also read that CPU cooler could be the problem.. This guy claimed that removing the CPU cooler and taping the holes for the fitting solved his problem. Hope that's not my case, also sounds really strange.

Sadly, my friend has the computer now.. I guess I will have to drive for it tomorrow to be able to test it.

edit: By "test it", I am talking about the PSU, not the strange tape solution..

 

[FalconWorks]

Update:

So, I got further on, now the Computer starts but the EZ Debug LED is red and nothing shows up on the screen. PC seems to be running just fine, but doesn't post. I am searching trough forums for hour and a half now trying to find the solution. There was a suggestion to take out a CPU and look for bent pins, but I am saving this as a last option, as I am pretty sure I won't find any.

Any ideas other than reseating the CPU? Also tried clearing CMOS (by removing battery), running with only 1 RAM stick, tested all the connectors are connected well.