[New build] Flashed the BIOS, still a weird boot loop and no display

[lnknblzk]

Hello.

Here is the list of my components, this is a new build :
1 Western Digital WD Blue 1TB, 64MB
1 Crucial MX300 525GB
1 Intel Core i7-6800K, 6x 3.40GHz
1 Crucial Ballistix Sport LT - DDR4-2400 - 16GB
1 Gigabyte GeForce GTX 1060 3GB Windforce OC 3G
1 Gigabyte GA-X99-SLI
1 Phanteks Eclipse P400
1 Cryorig A40
1 EVGA 850 GQ 850W ATX 2.3 (210-GQ-0850)

I have got a Gigabyte GA-X99-SLI, and I plugged everything. At the beginning, the system would shut down in one second, and then looping to start and shutting down repeatedly.

I used a USB to Q Flash Plus the BIOS as I have read that my processor could not be included in old version. So I removed the CPU and ram and flashed the BIOS.

Since then, my system starts (with only one ram as recommended sometimes) for about 20/30 seconds, then shuts down, restarts... Nothing is displaying on the screen linked to the HDMI port of my Gigabyte GeForce GTX 1060 3GB (on the first GPU slot as recommended). The fans of the GPU starts at the beginning (2s aprox.) and then shuts off.

Here's a photo of the build in case you might see something incorrect : http://imgur.com/a/KZYHd

What can I do ?

 

[alexoiu]

Hi, Try leaving single RAM module installed. Test each slot. Are you sure that the BIOS flash completed successfully?

 

[lnknblzk]

I have only one ram module installed, in the recommended slot.
Since I have nothing on my screen I can't be 100% sure that the flash was successfull but everything went as expected. Before that my system would boot loop for 1 s. Now it's 30s, then a restart...

 

[lnknblzk]

Up.
Please help