New Build MSI Z170A SLI PLUS no post, no image

[LawSen91]

CPU: Intel i7 7700K
Harddrive: Samsung 850 SSD 500GB
CPU Cooler: Cooler Master Hyper 212 LED
Power Supply: EVGA 700B bronze rated 700w
Motherboard: MSI Z170A SLI PLUS
RAM: PNY 2400MHz
Case: Rosewill Nighthawk 117

No error message, no post beep, and no image. Tried unplugging everything, reset the BIOS, tried different monitors, unset and reset the CPU. Out of ideas. Help!!

 

[KiL3MaNjAr0W]

Top left of your board you will see an 8-pin cpu power, did you plug that in from you psu?

 

[LawSen91]

Top left of your board you will see an 8-pin cpu power, did you plug that in from you psu?

Yes. The board shows no errors

 

[Paul NZ]

It needs a bios update for a Kaby Lake

Only way you can do that is with a Skylake. or take it to a shop

Or replace it with a B250, H270, or Z270 mobo

 

[KiL3MaNjAr0W]

Refer to your manual make sure LN2 is switched off and if you have a Q reset switch press it after doing so. if not clear your cmos 1 more time for safe measures and try to boot.