Question New Build, No Display

Dec 2, 2021
1
0
10
0
Hi,

Desperate for some help and wonder if anyone can provide some wisdom.

Built a PC for the first time, excitedly went to boot for the first time, and no display to the monitor. All the fans to the CPU, case and GPU start up. Just no display.

Here is my spec: https://uk.pcpartpicker.com/list/8skcQD

I have tried about as much as I can in terms of troubleshooting including almost everything on the long sticky post about these types of issues.

Plugged direct into the GPU;
Different motherboard;
Tried with hdmi/DP/DVI cables;
One stick of RAM at a time;
Reseated CPU, no bent pins;
Tested PSU using this https://help.corsair.com/hc/en-us/articles/360025085372-How-to-Test-a-power-supply-unit.

I don’t have another PC with different parts unfortunately to isolate each component to see if anything is faulty. Does anyone have a magic fix? I’m going insane!

Thanks in advance.
 
Last edited:

bdcrlsn

Distinguished
Dec 31, 2007
359
6
18,815
12
You also need to double check all your power connections and make sure the GPU is fully seated properly. Unfortunately, PC troubleshooting isn't always magical, sadly.
 

ASK THE COMMUNITY