Question New Build, tried it outside of case worked. Now that everything is inside the case it wont boot.

[BeardedDreamer]

Hello 👋
This is my second build and I decided to upgrade to Ryzen 7600x from a Ryzen 2600

Was following a guide was going pretty well decided to boot to bios before putting everything into the case. The cpu, ram, gpu the system booted and everything seemed well. Now I put everything into the case, connected everything was about to install windows and now it won't boot.

I checked everything, the motherboard standoffs where all in the right place I doubled checked that every cable was where they should be, gpu was fully seated. I got frustrated cameback after like an hour or two, turned on the pc and it booted was able to install window 11 but when it restarted it wouldn't boot anymore but everything is turned on. I don't know what to do please help me 😭

PC Specs:
Ryzen 5 7600x
Cooler: Thermalright Phantom Spirit 120 SE
Motherboard: Asrock Steel Legend B650e Wifi
PSU: Corsair RM850e
GPU: Gigabyte GTX 1080 Windforce
RAM: G.Skill Flare X5 6000 16GBx2
Case: NZXT H6 Flow

 

[Lutfij]

Welcome to the forums, newcomer!

If you've ruled out the front panel connectors to be properly connected, then you might be having a grounding issue whereby a standoff on the case is making contact with the rear of your motherboard. Might want to pass on a picture of your case with their standoffs, sans the motherboard.