Question New Build: VGA and Boot LED on -> no display signal, what should I do ?

[Agellustig]

So I just finished my new build with my Asus ROG Strix Z960-A Gaming Wifi D4 board. Tried to turn it on but my display shows nothing. Looked at the LEDs on the Mainboard and saw that it gets stuck at the VGA (white LED) and Boot (Yellow LED) everytime I start my PC. I should notice that my PC don't seem to have any other problem, fans, rgbs work fine.

My build:
CPU: i7-12700K
Cooler: Corsair h100i elite capellix
Mainboard: Asus ROG Strix Z690-A Gaming Wifi D4
Ram: 32 GB TridentZ DDR4
GPU: Asus ROG 2080


I should also notice that it also doesn't work without the GPU

 

[rgd1101]

brand and model of the psu?

 

[Agellustig]

brand and model of the psu?

Corsair CX 750F RGB

 

[roger911]

If you have an older video card, try replacing with that and seeing if you can get it to boot.

 

[Agellustig]

If you have an older video card, try replacing with that and seeing if you can get it to boot.

Ok, I'll try. But can the GPU be the Problem? I mean, even without the GPU, the same Q-LEDs are lighting up

 

[roger911]

"No POST", "system won't boot", and "no video output" troubleshooting checklist

"No POST", "system won't boot", and "no video output" troubleshooting checklist This checklist is a compilation of troubleshooting ideas from many forum members. It's very important to actually perform every step in the checklist if you want to effectively troubleshoot your problem. 1.Did you...

forums.tomshardware.com

Ok, I'll try. But can the GPU be the Problem? I mean, even without the GPU, the same Q-LEDs are lighting up

 

[Zerk2012]

Bent pins in the CPU socket would be the first thing I looked for.

 

[Agellustig]

Bent pins in the CPU socket would be the first thing I looked for.

Wouldn't the CPU LED light up then while booting?

 

[Agellustig]

Bent pins in the CPU socket would be the first thing I looked for.

Nope, no bent pins.