Question New Build wont work with DOCP Enabled

[stan_woj]

Hi, a first time user here

My new build with Ryzen 7 9800x3d , Corsair Vengeance 6000mhz RAM and ROG B650E-F refuses to boot correctly with DOCP enabled. Upon enabling, my computer flickers on then off making a 'click' sound before coming back on and booting into bios.

Any advice would be greatly appreciated

 

[NanoSuit3]

Full Specs of Build please?

 

[stan_woj]

Full Specs of Build please?

Sorry 2x16 6000mhz ram
3070
and I'm using a 970evo though i don't think that has any impact

 

[JayGau]

Sorry 2x16 6000mhz ram
3070
and I'm using a 970evo though i don't think that has any impact

You gonna have to give more details than that.

What is the RAM timing? CL30?

What voltage does it get set when you enable expo? Corsair RAM will not run stable at 1.35V when enabling expo. It has to be set to 1.4v. It's why expo optimized kit are set to 1.4v, but xmp ones are set to 1.35v.

Does it boot at default settings?

Also what are your GPU and PSU?

 

[stan_woj]

You gonna have to give more details than that.

What is the RAM timing? CL30?

What voltage does it get set when you enable expo? Corsair RAM will not run stable at 1.35V when enabling expo. It has to be set to 1.4v. It's why expo optimized kit are set to 1.4v, but xmp ones are set to 1.35v.

Does it boot at default settings?

Also what are your GPU and PSU?

Sorry for the late response, docp is working after updating bios - however my pc 'double boots' on every cold start. The PSU is a corsair 1000w and gpu is the 3070 suprim