I forgot to say i was getting a FX8150 within a week of release as Cpu xD.I just need cable management advice for now as they
hinder my 200mm fan in the front also both the sapphire Toxics i will be unlocking to 6970 and Im just worried they will get a bit
hot considering a cable is blocking the fan on the lower card a bit although i have another 200mm fan blowing air directly on it the average temps.
When installed it i had to manually push it to the left for me to screw it into the thingy on the case that holds it,I have a feeling i shouldn't have done that.
I want to put in the HafX's GPU air duct but I have a few problems the cables near the hard drive mountings are in the way and I don't know how to install the fan onto the air duct (which screws) so this is where the cable management comes in.
Here are the average temps for the card
http://www.overclockersclub.com/reviews/sapphire_hd6950_toxic_2gb/15.htm
when I unlock and overclock they should get 3-10C hotter on stock but i will be keeping my fans at 60% default and 100%
when gaming so i should see 30idle 56load overclocked at 100% 1-5C higher with an unlock and 46 idle 78load stock and stock
fan speed.