have just finished building a gaming rig but unfortunately when firing it up, it does not go to POST, all the fans run CPU included, led lighting runs, but no beeps or post.
I have tried with/without ram, have removed GPU, unplugged all sata leads, tried on VGA and hdmi, and still nothing.
have done 'breadboarding' with only cpu & hsf installed, (and MB speaker) but still no 'beeps'.
the bios LED on the MB swaps from main bios to back up bios all the time.
I even remove the CPU and reinstalled.
I read 'checklist/trouble shooting and went through each step from start to finish.
I swapped out the ram into my old pc and that fires up ok.
any/all suggestions will be most welcomed.
my system is:
Gigabyte Z97X-Gaming MB
Intel quad core E3-1271 LGA 1150 CPU
G.Skill Rip jaws-x 16gb ram
gigabyte GTX770 PCI-E video card
tough power 750W 80+ Gold PSU
Seagate 3.5" SSHD 2TB hd
WD 3.5" green 4TB hd
all in a Coolermaster Haf-X 942 case
I have tried with/without ram, have removed GPU, unplugged all sata leads, tried on VGA and hdmi, and still nothing.
have done 'breadboarding' with only cpu & hsf installed, (and MB speaker) but still no 'beeps'.
the bios LED on the MB swaps from main bios to back up bios all the time.
I even remove the CPU and reinstalled.
I read 'checklist/trouble shooting and went through each step from start to finish.
I swapped out the ram into my old pc and that fires up ok.
any/all suggestions will be most welcomed.
my system is:
Gigabyte Z97X-Gaming MB
Intel quad core E3-1271 LGA 1150 CPU
G.Skill Rip jaws-x 16gb ram
gigabyte GTX770 PCI-E video card
tough power 750W 80+ Gold PSU
Seagate 3.5" SSHD 2TB hd
WD 3.5" green 4TB hd
all in a Coolermaster Haf-X 942 case
Facebook
Twitter
Instagram