Hi guys! First post here so be gentle!
So, I got home today eager to test my new RTX 2080 Ti, only to find that not only is it probably too large for the case, the new PSU I need to use it (650W) won't fit either. The computer is an HP EliteDesk 800 G4 tower, and the motherboard says HP on it, so I'm guessing it's a custom thingy which makes it hard to find any info on make/model. The PSU is too big for the case, but I think it's more matter of the old standard HP PSU (500W) being smaller than average than the new one being particularly large. Also, instead of the standard large connector from the PSU to the motherboard, it has 3 small ones (the white one in the zoomed in pic).
So basically, I need to know which parts I can keep, and which ones I need to change in order to make this work. I realise I'll need a new case and motherboard, but do I need a new CPU with that? Can I use my old RAM? Will my SSD HD fit on a new MB? Anything else I should know about? I've attached a few pictures of the whole mess.
Many thanks for any advice!
https://imgur.com/gallery/I8qrHdV
https://imgur.com/gallery/auNcv7G
Processor
Number of processors 1 x
Processor family Core i7 7th Gen
Processor type Intel Core i7-7700
Processor clock frequency 3.60 GHz
Max. turbo clock rate 4.20 GHz
Max. TDP i 65 W
Number of processor cores i 4 (Quad core) i
Number of threads 8
Cache 8 MB
CPU socket i LGA 1151
Processor cooling properties
Processor cooling type Air cooled
Memory
Used memory total 16 GB
Used memory modules 16 GB
Max supported memory 64 GB
Memory type DDR4-RAM
RAM speed 2400 MHz
Memory form factor DIMM 288
Number of memory slots 2
Number of free memory slots 1
GPU: 1080 GTX
So, I got home today eager to test my new RTX 2080 Ti, only to find that not only is it probably too large for the case, the new PSU I need to use it (650W) won't fit either. The computer is an HP EliteDesk 800 G4 tower, and the motherboard says HP on it, so I'm guessing it's a custom thingy which makes it hard to find any info on make/model. The PSU is too big for the case, but I think it's more matter of the old standard HP PSU (500W) being smaller than average than the new one being particularly large. Also, instead of the standard large connector from the PSU to the motherboard, it has 3 small ones (the white one in the zoomed in pic).
So basically, I need to know which parts I can keep, and which ones I need to change in order to make this work. I realise I'll need a new case and motherboard, but do I need a new CPU with that? Can I use my old RAM? Will my SSD HD fit on a new MB? Anything else I should know about? I've attached a few pictures of the whole mess.
Many thanks for any advice!
https://imgur.com/gallery/I8qrHdV
https://imgur.com/gallery/auNcv7G
Processor
Number of processors 1 x
Processor family Core i7 7th Gen
Processor type Intel Core i7-7700
Processor clock frequency 3.60 GHz
Max. turbo clock rate 4.20 GHz
Max. TDP i 65 W
Number of processor cores i 4 (Quad core) i
Number of threads 8
Cache 8 MB
CPU socket i LGA 1151
Processor cooling properties
Processor cooling type Air cooled
Memory
Used memory total 16 GB
Used memory modules 16 GB
Max supported memory 64 GB
Memory type DDR4-RAM
RAM speed 2400 MHz
Memory form factor DIMM 288
Number of memory slots 2
Number of free memory slots 1
GPU: 1080 GTX