New GPU installed and this started to happen

[iamjigarpuri]

My Rig
Dual Core E5500 @.2.80ghz Overclocked to 3.2ghz
Zotac Gtx 750 Ti 2GB (never overclocked)
4gb DDR2 ram
Zebronices 450w PSU

I don't know what's actually happening... Whenever i play games like Mad max or Hellblade in Ultra settings screen colour just goes solid to random yellow black or blue and nothing shows after that even keyboard's Num lock light works On-Off when i press the button and also CTRL+ALT+DEL not works... These games ran for a few seconds with best FPS smoothly but then this happens...

I have tried to play in Low settings and it worked fine with no errors or screen problem with same FPS... I just wanna play in high-ultra settings...

PLS HELP ME 🙁

 

[jay32267]

Perhaps you are just going beyond the capabilities of your system. That CPU and video card are extremely weak for today's games.

 

[DRagor]

^^ that is one possibility. Other is your PSU is just not giving enough power to the system under full load. Zebronics are dreadfully low quality units.

 

[tyleramick01]

My Rig
Dual Core E5500 @.2.80ghz Overclocked to 3.2ghz
Zotac Gtx 750 Ti 2GB (never overclocked)
4gb DDR2 ram
Zebronices 450w PSU

I don't know what's actually happening... Whenever i play games like Mad max or Hellblade in Ultra settings screen colour just goes solid to random yellow black or blue and nothing shows after that even keyboard's Num lock light works On-Off when i press the button and also CTRL+ALT+DEL not works... These games ran for a few seconds with best FPS smoothly but then this happens...

I have tried to play in Low settings and it worked fine with no errors or screen problem with same FPS... I just wanna play in high-ultra settings...

PLS HELP ME 🙁

Your not going to have much luck playing much of anything on that system. But I can think of three potential problems, You're thermal paste is old/dried out and your system is overheating or your PSU is about to die. The only other issue I could think of would be your CPU is beginning to burn out from the overclock. If you have determined that it is the last one (HWMonitor output would be helpful), than you should try dropping down to a maximum of 3.06GHz (BCLK 266, MULT 11.5) with a lower VCORE.

Sources: See tables 10,11, and 15: Pentium E5500 Datasheet (This link contains all types of useful info about your CPU, you should look through here to make sure that you are running your CPU at the proper specs)

 

[iamjigarpuri]

Perhaps you are just going beyond the capabilities of your system. That CPU and video card are extremely weak for today's games.

Yeah that might be the problem...

 

[iamjigarpuri]

^^ that is one possibility. Other is your PSU is just not giving enough power to the system under full load. Zebronics are dreadfully low quality units.

That's what most said too.... Okay i think i must change it now...
Please suggest me which one and what volt of PSU will be good for my rig...

 

[iamjigarpuri]

My Rig
Dual Core E5500 @.2.80ghz Overclocked to 3.2ghz
Zotac Gtx 750 Ti 2GB (never overclocked)
4gb DDR2 ram
Zebronices 450w PSU

I don't know what's actually happening... Whenever i play games like Mad max or Hellblade in Ultra settings screen colour just goes solid to random yellow black or blue and nothing shows after that even keyboard's Num lock light works On-Off when i press the button and also CTRL+ALT+DEL not works... These games ran for a few seconds with best FPS smoothly but then this happens...

I have tried to play in Low settings and it worked fine with no errors or screen problem with same FPS... I just wanna play in high-ultra settings...

PLS HELP ME 🙁

Your not going to have much luck playing much of anything on that system. But I can think of three potential problems, You're thermal paste is old/dried out and your system is overheating or your PSU is about to die. The only other issue I could think of would be your CPU is beginning to burn out from the overclock. If you have determined that it is the last one (HWMonitor output would be helpful), than you should try dropping down to a maximum of 3.06GHz (BCLK 266, MULT 11.5) with a lower VCORE.

Sources: See tables 10,11, and 15: Pentium E5500 Datasheet (This link contains all types of useful info about your CPU, you should look through here to make sure that you are running your CPU at the proper specs)

Yeah i have even tried to play games without overclock too... With default 2.80ghz but it still happens...
One more thing that i played WWE 2k17 with high-ultra settings smoothly with no errors or screen problems for hours... WWE 2k17 is a little requires a little more of Sys Req then Hellblade even so i never faced that problem while playing WWE 2k17...

Should i buy a new PSU?

 

[DRagor]

Obviously, it's hard to predict if changing PSU will solve the problem, but I would strongly suggest changing it anyway. The question remains, change it what. That depends on what you have available around. Unit like this would be much better if you can get it: https://www.amazon.com/dp/B01B72VXE6/?tag=pcpapi-20&pldnSite=1&th=1

 

[iamjigarpuri]

Obviously, it's hard to predict if changing PSU will solve the problem, but I would strongly suggest changing it anyway. The question remains, change it what. That depends on what you have available around. Unit like this would be much better if you can get it: https://www.amazon.com/dp/B01B72VXE6/?tag=pcpapi-20&pldnSite=1&th=1

It's a little costly here... Pls a lower in price and best if possible Please...

 

[DRagor]

It's a little costly here... Pls a lower in price and best if possible Please...

Sure ... if you can narrow where your HERE is 😉 or better yet, drop a link to shops you buy at.

 

[iamjigarpuri]

It's a little costly here... Pls a lower in price and best if possible Please...

Sure ... if you can narrow where your HERE is 😉 or better yet, drop a link to shops you buy at.

So sorry for late reply... This one (Corsair VS550 550-Watt Power Supply)

Link: https://www.amazon.in/gp/product/B00DQ5OB4C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Is this enough for my Rig...

Processor - Changed From Pentium Dual Core E5500 2.80Ghz To Pentium Dual Core E6700 3.20Ghz
GPU - Zotac Gtx 750 ti 2gb DDR5
RAM - 4GB DDR2
HDD - Seagate 1TB
MOBO - It's an old one doesn't shows it's model properly even in CPU-Z but still that's all it shows...
Simmtronics
Chipset Intel P35/G33/G31
Southbridge Intel 82801GB (ICH7/R)
BIOS American Megatrends Inc.
Version 080014
Date - 05/11/2009
(And that's all i know about my motherboard) 🙁

 

[DRagor]

So sorry for late reply... This one (Corsair VS550 550-Watt Power Supply)

Link: https://www.amazon.in/gp/product/B00DQ5OB4C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Is this enough for my Rig...

This unit is vastly superior in quality to what you have (although it is just medium level unit), and it has more then enough power for your setup.