New hdd not booting up

[Narensen]

Hello

i just brought new segate SATA 1Tb hdd.
I installed window 7 32 bit smoothly. and after that install my other softwares like anti virus, office 2007, photoshop.
but when i restart then its not booting up.
I changed in boot menu hard disk on top but a black screen come up with blinking arrow.
but when i make DVD in top in boot menu then system is installing window again.

in boot menu i tried this also ..there i disabled the DVD drive and others also only kept HDD but i got blank screen with blinking arrow.

i point out one thing that all drives which i made first all are dynamic not primary or basic.

so i reinstall the window and now my all partitions are primary (basic). 2-3 restarts its fine but now again its on blank screen with white blinker. and if i do cntr+alt+delete on that blank screen then system restarts.

please if anybody have solution help me.

Thanks

 

[SuperSoph_WD]

Hey there, Narensen!

I'd recommend you to try to resolve the issue by resetting BIOS. You can do that by either re-seating the CMOS battery, or resetting the jumper on the motherboard. Here's a guide that can walk you through the procedure: http://www.wikihow.com/Reset-Your-BIOS
I'd also check your mobo manufacturer's website for any SATA controller updates for your model.

Good luck! Hope this helps!
SuperSoph_WD