I assembled a new pc 2 days back to replace my old c2d system
Specs
Intel i7 4770(non k)
Gigabyte Z97x GD3H BK
Kingston Hyper x Fury 8Gb 1600Mhz
Corsair Vs550 Psu
Windows 8.1 update 1 x64
It Rebooted on its first boot itself.... At that time it was because of loose processor fan. So I fixed it and then it worked fine for some time and then it Rebooted unexpectedly while copying some files. Then It Worked Fine For a day and then again today the cabinet got struck with my leg and the system Rebooted.... and from then onwards even on the slightest touch it reboots... the couple temp are 40-48 on idle and 58-68 while under load. It also reboots as soon as I open hot pursuit 2010 and even while just listening music.. Can the os be a problem as it was installed on c2d??
and sometimes it just gets stuck in boot loop and doesn't get past bios post.... and boots up after 8 or 9 bootloops
apart from the clean install I have tried all the things
i also tried breadboarding but it then too spins the fans for 3-4 secs and then reboots
i disabled the c6/c7 state in bios and even the c3 but none of them helped
thank you in advance
i tried doing a clean wipe of the os and reinstalled it .the os was installed and the drivers too ....all the things are up to date but when i try to run prime 95 blend test the system reboots instantly as soon as the blend test starts
Specs
Intel i7 4770(non k)
Gigabyte Z97x GD3H BK
Kingston Hyper x Fury 8Gb 1600Mhz
Corsair Vs550 Psu
Windows 8.1 update 1 x64
It Rebooted on its first boot itself.... At that time it was because of loose processor fan. So I fixed it and then it worked fine for some time and then it Rebooted unexpectedly while copying some files. Then It Worked Fine For a day and then again today the cabinet got struck with my leg and the system Rebooted.... and from then onwards even on the slightest touch it reboots... the couple temp are 40-48 on idle and 58-68 while under load. It also reboots as soon as I open hot pursuit 2010 and even while just listening music.. Can the os be a problem as it was installed on c2d??
and sometimes it just gets stuck in boot loop and doesn't get past bios post.... and boots up after 8 or 9 bootloops
apart from the clean install I have tried all the things
i also tried breadboarding but it then too spins the fans for 3-4 secs and then reboots
i disabled the c6/c7 state in bios and even the c3 but none of them helped
thank you in advance
i tried doing a clean wipe of the os and reinstalled it .the os was installed and the drivers too ....all the things are up to date but when i try to run prime 95 blend test the system reboots instantly as soon as the blend test starts