Question New motherboard, cpu and ram but no signal on monitor or keyboard and mouse

[DimesDarkheart]

I recently upgraded from
Asus M5A97 R2.0
Hyper X Fury 1866MHz ddr3
AMD FX 8350

To

B450M DS3H
G.Skill Aegis DDR4 3000MHz
Ryzen 3600

The lights and the fan all turn on with leds but my monitor doesn't show anything, the keyboard and mouse don't turn on leds either. I even tried running the pc with the Athlon 200ge but it's the same.

 

[Fix_that_Glitch]

What bios are you using on the motherboard?

 

[DimesDarkheart]

What bios are you using on the motherboard?

A gigabyte bios. I presume it's F30 since I haven't been able to update it

 

[Fix_that_Glitch]

You have to be at least f40 to run the 3600, also the memory is not listed as supported, but I think your problem is just the bios.

 

[Fix_that_Glitch]

make sure you do it in steps, you have to load F32 first, then load F40.

 

[Fix_that_Glitch]

And your chipset driver needs to be 18.50.16.01 or newer.

 

[DimesDarkheart]

I am using the athlon 200ge for exactly this reason to update it but even with the 200ge it doesn't work. I can't get in the bios. Even without ram it doesn't display anything just black screen and nothing

 

[Fix_that_Glitch]

Yeah if your bios on the motherboard is the first one it doesn't support the 200ge either.

 

[Fix_that_Glitch]

my mistake it should work with the 200ge out of the box.

 

[Fix_that_Glitch]

Di you try only using one stick of ram with the 200ge?

 

[DimesDarkheart]

Yes tried both then one and then none.

 

[Fix_that_Glitch]

Ok so what are your full system specs lets start at the beginning.

 

[DimesDarkheart]

Right now it's
B450M DS3H
G.Skill Aegis DDR4 3000MHz
Ryzen 3600 with stock fan
ASUS GTX 1060 6GB
Kingston 120GB SSD
some 1GB HDD
CP 750W Plus