New motherboard problem

[Austin Bragg]

Hi. I recently got an Asus p5q se plus and put it in my new case which is a Rosehill challenger. I mounted it in the case and connected everything to it. I've got a geforece gt610 along with a q6600. I'm using my hard drive from my old computer as well. My problem is when I turn it on the fans spin and the hard drive boots up and everything seems to be working fine except I get no display. I've tried taking out ram and even without ram I get no beeps. I've got my speaker hooked up correctly and have checked the trouble shooting guide which was very useful except it didn't fix my problem. Any help would be greatly appreciated. Thanks

 

[Phillip Corcoran]

First off you need to be 100% sure that the monitor actually works, especially if it is not showing "No Signal" on the screen (or is it?). Try it on another PC (or connect it to the on-board GPU) so you can put that "unknown" to bed.

You might want to try reseating the GPU card if the monitor proves to be okay.

 

[Austin Bragg]

The monitor is working just fine. And I've taken the GPU out plenty of times and put it back in. This board has no on board graphics and I should at least be getting a beep when no ram is in it which I'm not

 

[Austin Bragg]

I had 533 my memory and it was not compatible. Ordered new memory and works fine. Reformatted drive and she runs like a charm thanks for the help.

 

[Phillip Corcoran]

Thanks for the update.