New pc build, no display

[Guest]

Hello, this is my first pc build and im having a bit of trouble my Gpu display. when i boot the pc, the GPU fan runs but there's no picture. ( the other components run too )

I have the PCI-E's form the PSU in good, I made sure the GPU is in the slot corretly, I tried the PCiex4 slot didn't work, I tried removing the CMOS battery and putting it back in, didn't work. I made sure the ram was in all way, tried each ram slot..no luck.

specs:
PSU: CROSAIR CX 600W

GPU: HIS 6870 Radeon 1 gig

RAM: kingston hyper blu 4 gig ram

CPU: AMD phenom II Quad Core Prossesor X4 965

HDD: Western digital caviar 500 GB

MOBO: GIGABYTE GA-970A-DS3 AMD 970/SB950 AM3+ FX ATX Motherboard ( revision 1.1)

So if someone can please help me out. Thank you.

 

[ASHISH65]

Have plugged 6pin connector to gpu from psu?

 

[Guest]

Yes, i have it pluged in.

thanks for the reply

 

[ASHISH65]

1)Unplug the gpu and boot into system and update your mobo's bios to latest 2)check that gpu in other's pc.

 

[wanderer11]

Is the monitor plugged into the gpu?Is the 8 pin cpu power cable plugged in?

 

[Guest]

1)Unplug the gpu and boot into system and update your mobo's bios to latest 2)check that gpu in other's pc.

I don't have another pc to check the card (Im messaging you guys from my ps3)

I'm sorry but how exaclty do i boot into the system? and upgrade? i can't see anything

 

[Guest]

Is the monitor plugged into the gpu?Is the 8 pin cpu power cable plugged in?

yes the Gpu is pluged into the monitor, the 8 pin power cable is not plugged in. I don't see a spot to plug it in...

 

[Guest]

ok i figured it out... all i had to was just take the 8 pin and fit it into the ATX...my lession

READ YOUR MAUALS.. I'd like to thank you all for helping me out! 😀