New pc build wont detect monitor

[shawks13]

I just finished building my computer and go to plug everything in and my hdmi monitor won't work. Everything boots with working lights and fans. I did notice that i have a warning light for DRAM on. Ive attempted to remove both of my RAMs and no luck. Ive also removed my graphics card and tried connecting to the mobo directly with no success. Ive attached my build below. Any help would be welcome. Thanks

https://pcpartpicker.com/list/HHVJgL

 

[Ironsounds]

Hello... 1) You have to push a button on your Monitor for the setup screen and set the monitor for the cable/input type... did you check this?
2) You should boot your Computer without the Video card plugged in and use the CPU/GPU/MB outputs for Display... you will need to change a setting in your BIO's (save&exit), to enable the Video card use on next Boot... I suggest installing your OS first without the Video card... it can be added later after all your MB/hardware drivers are installed B /

 

[shawks13]

I have made sure the monitor is set to hdmi and verified with another computer that it works.

And are you saying to completley remove video card?

 

[Ironsounds]

Hello... Yes from the MB slot and PS... we can add it later... we need to get your CPU/Ram/BIO's/HD's talking first B )
You MB BIO's is defaulted to use the CPU/GPU in your intel system... until a setting change... we need to use the CPU/GPU to get a BIO's screen to do this.

 

[shawks13]

Ok i have got the bios open. I have gpu currently removed. Also i had to rome the ram from slot 2 so currently only have ram in slot 4. Where should i go now