Question New PC is running at only 25FPS and I don't know why ?

[boju]

What utilities or programs you got running on startup? Check startup items in task manager.

 

[Darthbane117]

What utilities or programs you got running on startup? Check startup items in task manager.

Only the AMD software and steam.

 

[boju]

Download gpuz, what does pcie bus report as after clicking the question mark. Run the imbedded test and look at sensors on temps. Upload some screenshots of it.

 

[Darthbane117]

Download gpuz, what does pcie bus report as after clicking the question mark. Run the imbedded test and look at sensors on temps. Upload some screenshots of it.

https://imgur.com/a/BguIbwc

View: https://imgur.com/a/BguIbwc

 

[boju]

And what does bus interface say? Click the question mark.

 

[Darthbane117]

And what does bus interface say? Click the question mark.

https://imgur.com/jaPs94V

View: https://imgur.com/jaPs94V

 

[boju]

In the sensor page is there more you can scroll down to? Look at memory temperature. Wondering why memory clock is so low.

 

[Darthbane117]

In the sensor page is there more you can scroll down to? Look at memory temperature. Wondering why memory clock is so low.

I can't scroll down any further to look at the memory temp.

 

[boju]

Looks like Amd hides sensors on purpose.

https://www.techpowerup.com/forums/threads/6800xt-sensors-missing.288718/

Hwinfo64 seems to show vram temp but that thread is old, don't know if still the case.

Was your card bought used?

 

[boju]

Going back to memory clock thing, does it increase while running benchmark?

 

[Darthbane117]

Going back to memory clock thing, does it increase while running benchmark?

My memory clock stays the same.

 

[boju]

Try see if Hwinfo64 shows temps.

Was card bought new or used? I'm wondering if it was bought second hand the previous owner might've failed replacing vram thermal pads.

 

[Darthbane117]

Try see if Hwinfo64 shows temps.

Was card bought new or used? I'm wondering if it was bought second hand the previous owner might've failed replacing vram thermal pads.

It was bought new.

 

[boju]

Contact Powercolor and see what they have to say about vram frequency not increasing whether there's something wrong with it.

Check Hwinfo64 anyhow if frequency shows differently there.

 

[Darthbane117]

Contact Powercolor and see what they have to say about vram frequency not increasing whether there's something wrong with it.

Check Hwinfo64 anyhow if frequency shows differently there.

Im thinking about just replacing the gpu, is there any way to check if it is only the gpu or could it be any other parts?

 

[boju]

Yeah, remove graphics card and see what you get with igpu.

Then that's half the job done reseating the card afterwards and rechecking pcie power cables.

 

[LuKaWin10]

Im thinking about just replacing the gpu, is there any way to check if it is only the gpu or could it be any other parts?

Try the IGPU. Reseat the RAM, Processor, check if everything is plugged well. RMA the board or the GPU, try eliminating what causes the Issue! Update us too! I didn't answer yesterday because my left arm hurt and writing was complicated...

 

[LuKaWin10]

I have all of the drivers but i don't know hot to the xmp/expo in the asrock bios.

Maybe Thermal throttling? Reseat the Cooler and apply thermal paste! If you bought the VGA used then repaste it

 

[LuKaWin10]

Im thinking about just replacing the gpu, is there any way to check if it is only the gpu or could it be any other parts?

Did you put ur memory in Dual-Channel mode? You need to do that! Did you install the correct/newest ASRocK Chipset drivers? Try reflashing, clearing CMOS, optimizing the features by a youtube guide?