New pc no beep no post but fans are spinning

[silver9599]

Good evening everyone
I've just assembled my first gaming pc without any problem but when I try to do a post without even having the gpu installed yet, the pc does not post and it doesn't beep or anything.. Fans are spinning but nothing happens.. The nzxt logo on the cooler doesn't turn on though
The specs are:
I5 7500
1070 gaming x
Corsair vengeance 16gb 2133mhz
Kraken x61
Evga gq 650w
Any help? Thanks a lot in advance

 

[Herc08]

Why do you have an AIO on a non-K CPU? Oh well, to each's own. Is the RAM seated properly? Are ALL the cables secured properly? It seems your motherboard is working since fans are spinning. Also, make sure the right connector is plugged into the PSU itself (PCI-E, CPU, etc)

 

[silver9599]

Yes all cables are connected regularly and they are all correct.. I'm trying to post with the integrated graphics so I don't have a gpu installed.. Yes ram is seated correctly and the two slots are seen correctly
Any other help? Thanks in advance

 

[Herc08]

Well, you may need to do the RAM test. It takes a while, but we need to rule out RAM. The way it works, take all the RAM stick out. Put stick 1 in slot 1, boot, record results. Shut down. Put stick 1 in slot 2, boot, record results. Shut down. If you have two other slots do those as well. Then take stick 2, and repeat the process. It is tedious, but if RAM is not working, your system will not POST.

 

[silver9599]

Now I got 2 short beeps but no post or video signal
What do the 2 short beeps mean?

 

[silver9599]

I've figured it out.. It's ami bios so it means parity error.. Do I have to replace my ram sticks?

 

[adiec]

what motherboard do you have ?

edit: the reason i ask is because a lot of people make the mistake of buy a h110 b150 or z170 motherboard and then pair it with a 7th gen cpu. so checking to make sure you haven't done that .

 

[silver9599]

No no, I have a h270 mobo (h270 gaming m3 precisely) paired with a i5 7500..so no compatibility errors