Question New PC Ram debug light

[badboybakjer]

Hello all,

Just built a new PC, all new parts and im having a issue, when i first start my computer i get blinking back and fourth for about 2 seconds between RAM and CPU. It stops on RAM though after that and stays lit. (After a Cmos reset this weems to happen, the following restarts it just stays on Ram all the time) I've tried the below solutions but still nothing. Just trying to narrow down what could be causing the issue. I cant get bios or any display.

Swapped between 1 or 2 sticks and swapped between A2/B2
Cmos reset
Pulling all Ram to see if it stays on ram (it does)
Pulled cpu to see if it stays on Cpu (it does)
Checked pins on cpu with phone on like 6x zoom, no pins look damaged or bent.
Put extra pressure on cpu cooler to verify it wasnt loose

Motherboard: MSI Z790-P wifi
RAM: CORSAIR DDR5-6000MHz Desktop PC Memory VENGEANCE DDR5 Series (PC5-48000) Intel XMP Memory Kit, 32 GB, Black, CMK32GX5M2E6000C36
CPU: Intel Core i5-14600K
PSU: CM V1000 Platinum
GPU: Rtx Galax 4080 (I have removed this from the PC for T/S the other stuff)

Could this be a memory incompatibility issue? (Its not on the list but it supports 6k for OC, will it not support it stock?)
Bios issue? (I Plan on flashing my bios in the morning, it should have shipped with "14 gen bios" according to the seller and sticker on the box.
Motherboard issue?

Any help would be very greatly appreciated!

 

[zinkles]

I'd say a BIOS update should be able to fix this. The changelog mentioned, the 14th gen CPUs are supported on a much later BIOS version than the stock one, so I doubt the version you have supports it. (especially, since your CPU is a "K" series, which usually needs another BIOS update to be fully supported)

 

[badboybakjer]

Sadly, no dice with the BIOs update 🙁