The PC works right now in its old configuration but, I can't use the working RAM on slot 2 it won't boot. The CPU Revs up and down. The PC does not boot at all, Just black screen. "Reseat the CPU" it's on their like a Rock. The 1st slot works the other ram does not work on 1st or 2nd slot. I'm about to return It to do a RMA on my MOBO because, I need more than 8GB of ram. Before this build I had a GIGABYTE GA-H170N-WIFI that was 3 months ago not 10 years LOL. anyway it was paired with a Kingston HyperX FURY 8GB 1600MHz DDR3. I matched it with a 4GB POS RAM from a old entertainment system to see if it would work. The RAM was a TwinMOS PC3 10600 4GB DDR3 1333MHz. I kid you not. It worked. System tab showed 12GB RAM. I find it ever so hard to believe something this similar not only did not work but, blew out my socket. Thank you for your help Cat with a Guitar, much appreciated. The only issues Is, do I sell my ram and get a set? which would suck because I got one hell of a deal on it or try again with new MOBO and RAM? Oh one more thing. The day I got the ram it was outside for a few hrs I think it was in the 30s. I opened up the package their was precipitation from temperature differentiation on the RAM. I installed it about 5 min later. I don't remember If the ram was dry but, maybe that somehow F#$ed it up for me. Because at first the system booted with two Dimms, System only read 8GB but the PC booted. I than removed and reinstalled it the PC did not boot with 2 Dimms anymore.