New router messing around

[Finpro]

When some of my devices connect to my new router They get Limited Access (Connected: No internet access) I Don't know why this is happening. It is happening to specific devices and when i restart the router The same thing happens again to the same Devices. By the way my router's cable is ADSL, Not sure if that would matter.

 

[jay32267]

If you click "disconnect" then "connect" does it connect?
If so....I've had this happen a few times.
I think it's just that the devices don't like the router signal dropping out and then coming back.

 

[Finpro]

If you click "disconnect" then "connect" does it connect?
If so....I've had this happen a few times.
I think it's just that the devices don't like the router signal dropping out and then coming back.

Sadly nothing happened.
I Have also tried every solution i found on the internet Sadly My phone and my laptop still don't get internet access.

 

[Ralston18]

Check the splitter (sometimes referred to as a filter).

It is a very small (1" x 2") box with a telephone wire coming in (from ISP) and two wires going out. One outbound wire goes to the router. The second outbound wire goes to the telephone system.

Splitters are cheaply made and can and do fail. LIkewise the connecting cables and plugs may cause problems.

If you google words such as "ASDL splitter diagram" you will find many diagrams and images. Change the search criteria to narrow the results as necessary for your setup.

Hopefully just a bad splitter or cable.