Recently replaced my old processor, motherboard and memory. Here are my specs:
-gigabyte b450m ds3h
-AMD Ryzen 5 3600X
-RX 580
-Corsair Vengeances 16MB DDR4
-2 hard drives - 1TB and 500 MB
-600W Power supply
-DIYPC case
Here is what I have done thus far:
-Installed new motherboard, processor and RAM. Attempted to boot but kept crashing, eventually could not boot at all. Reset PC.
-Reset PC did not fix. Removed a stick of RAM and updated the BIOS.
-Reset the PC again with freshly updated BIOS.
Here is what is happening:
-PC takes forever to repair or reset. When reset, it will run fine for a few moments, then shut off abruptly. Afterwards it will require another repair or reset.
-Currently on my second full reset and it is getting stuck in the process or taking hours to complete or just shutting off randomly.
-I thought it was the RAM so I took out one stick and updated the BIOS. These problems seem to persist. I'm hoping another reset will repair this.
Any insight is appreciated. I'm currently writing this while doing my third reset of the machine. Nothing seems to help.
-gigabyte b450m ds3h
-AMD Ryzen 5 3600X
-RX 580
-Corsair Vengeances 16MB DDR4
-2 hard drives - 1TB and 500 MB
-600W Power supply
-DIYPC case
Here is what I have done thus far:
-Installed new motherboard, processor and RAM. Attempted to boot but kept crashing, eventually could not boot at all. Reset PC.
-Reset PC did not fix. Removed a stick of RAM and updated the BIOS.
-Reset the PC again with freshly updated BIOS.
Here is what is happening:
-PC takes forever to repair or reset. When reset, it will run fine for a few moments, then shut off abruptly. Afterwards it will require another repair or reset.
-Currently on my second full reset and it is getting stuck in the process or taking hours to complete or just shutting off randomly.
-I thought it was the RAM so I took out one stick and updated the BIOS. These problems seem to persist. I'm hoping another reset will repair this.
Any insight is appreciated. I'm currently writing this while doing my third reset of the machine. Nothing seems to help.