New Ryzen Build EZ-DEBUG

[MrDingleFart]

I built a new PC last week and the bios on the motherboard wasn’t updated for Ryzen 2, the EZ-DEBUG CPU light came on for 10 seconds and then turned off. All the led’S and fans spin but there is no display. I just got my motherboard updated and everything turns on but there is still no display, when I turn the PC on EZ-DEBU says CPU then a few seconds later VGA and after that BOOT and then they all turn off. Please help, any advice is greatly appreciated.

Build

Ryzen 2600x
MSI X370 SLI PLUS
Corsair RGB PRO 16GB DDR4 (2x8)
Rx 570 Gigabyte
Thermaltake 650W
Random SSD that I know works

 

[cin19]

If you have other GPU or good brand PSU, then try out, because the Thermaltake 650W may or may not handle the rx570.

Also check the cpu to see there is any bent pin or not.