New SSD (Samsung evo 860) and keep getting blue screen of death

[kongmoua12]

Hi guys I have a new samsung evo 860 and I recently imaged it with a windows 10 pro image. Upon successfully booting into windows, the PC keeps encountering an error after about 10mins. The PC is an HP Pavilion Elite HPE-400y. Only mod is the ssd. Error is Critical Process Died. I have already tried another SSD that is confirmed working and it still does not work on this HP PC. I then plugged the SSD onto my laptop and it is working fine. Already did a disk check and is good.

Here is the link to one of the files after sfc scan.
https://www.4shared.com/file/dVsuTrf8fi/CbsPersist_20181207021402.html

 

[karenjoly]

Does the HP work with the original disk in it ? The one the new drive replaced ?

 

[kongmoua12]

Does the HP work with the original disk in it ? The one the new drive replaced ?

Yes it works it the original hard drive. The ssd does not.

 

[karenjoly]

You say the new disk works in the laptop ? It boots the laptop ?How is that ? Are your machine and the laptop identical ?

 

[kongmoua12]

You say the new disk works in the laptop ? It boots the laptop ?How is that ? Are your machine and the laptop identical ?

Yes the new SSD works in the laptop. When i plug the new SSD into the computer, it will boot up fine and everything then 5-10mins it would either freeze or go to the blue screen.

 

[karenjoly]

What does imaged it with a windows 10 image mean? Is that a clone ? or some windows imaging application ?