- Nov 18, 2023
- 2
- 0
- 10
Mobo: Asus B650E ITX
CPU: Ryzen 7800x3D
Ram: XPG Lancer Blade DDR5 6000 CL30 16GBx2 (purchased as a kit)
GPU: Asus Tuf 4070
PSU: Corsair SFX 750W
My new build wont post if I use both sticks of RAM my computer wont post. It stays on a yellow DRAM light and doesn't change. The computer will boot and post with either of the two sticks inserted into the first slot but not if both are inserted. I've tried reseating the CPU cooler, enabling EXPO in the BIOS, clearing CMOS, adjusting the voltage to 1.4v, and updating the bios to the most recent version. The computer works just fine with one 16GB stick but not with a second. Any advice as to what I can do to get it working with both sticks?
I'm not terribly experience with messing around in the BIOS so I'm a little reluctant to do it without some clear guidance from someone who actually knows what they're doing.
CPU: Ryzen 7800x3D
Ram: XPG Lancer Blade DDR5 6000 CL30 16GBx2 (purchased as a kit)
GPU: Asus Tuf 4070
PSU: Corsair SFX 750W
My new build wont post if I use both sticks of RAM my computer wont post. It stays on a yellow DRAM light and doesn't change. The computer will boot and post with either of the two sticks inserted into the first slot but not if both are inserted. I've tried reseating the CPU cooler, enabling EXPO in the BIOS, clearing CMOS, adjusting the voltage to 1.4v, and updating the bios to the most recent version. The computer works just fine with one 16GB stick but not with a second. Any advice as to what I can do to get it working with both sticks?
I'm not terribly experience with messing around in the BIOS so I'm a little reluctant to do it without some clear guidance from someone who actually knows what they're doing.
Facebook
Twitter
Instagram