Hey guys! Want to make this as detailed and as clear as possible so here we go. I'm still very new and learning so this is my 2nd build and components are:
MSI x570 gaming plus Mobo
Ryzen 9 3900x
GeForce RTX 2060 super
Oloy DDR4 2x16 32gb 3200mhz
*Air cooled system with Noctua
NH D-15 keeping CPU at 29°idle
Now where I'm running into a wall is overclocking the ram. I know i could've probably gone with a better ram set but they seemed like a great value for the price.
(1) So a few questions, because a couple people have told me these should be A-die ram and was wondering if anyone has any tips with A-die? (Thaiphoon does not show die type)
(2) And from my understanding to keep the ryzen 3900x at 1:1 ratio I should keep the ram at 3200 or less right? Or should I push it past that?
(3) Please keep in mind I'm not trying to go real extreme with anything. I have the 3900x only at 4.3 and 1.3v. The ram I can't seem to me with too much though without it being unstable. I set CPU and GPU to stock and I can't even adjust RAM from 16-18-18
to 15-17-17 and command rate to 1T without it not wanting to boot to bios. Dram 1.4v, SOC 1.15v.
Does that seem right?
Thank you for any help! 🙂🙏
RAM link-
https://www.newegg.com/oloy-32gb-288-pin-ddr4-sdram/p/N82E16820821196
MSI x570 gaming plus Mobo
Ryzen 9 3900x
GeForce RTX 2060 super
Oloy DDR4 2x16 32gb 3200mhz
*Air cooled system with Noctua
NH D-15 keeping CPU at 29°idle
Now where I'm running into a wall is overclocking the ram. I know i could've probably gone with a better ram set but they seemed like a great value for the price.
(1) So a few questions, because a couple people have told me these should be A-die ram and was wondering if anyone has any tips with A-die? (Thaiphoon does not show die type)
(2) And from my understanding to keep the ryzen 3900x at 1:1 ratio I should keep the ram at 3200 or less right? Or should I push it past that?
(3) Please keep in mind I'm not trying to go real extreme with anything. I have the 3900x only at 4.3 and 1.3v. The ram I can't seem to me with too much though without it being unstable. I set CPU and GPU to stock and I can't even adjust RAM from 16-18-18
to 15-17-17 and command rate to 1T without it not wanting to boot to bios. Dram 1.4v, SOC 1.15v.
Does that seem right?
Thank you for any help! 🙂🙏
RAM link-
https://www.newegg.com/oloy-32gb-288-pin-ddr4-sdram/p/N82E16820821196