Hi everyone. i got a new used desktop for a great deal. Here are the specs:
i7-920
Asus P6TD-Deluxe Mobo
Corsair sata 3 120gb SSD (assuming was the boot drive)
1.5 TB WD 7200 rpm HDD
AMD 6970 2GB GPU
BFG 900 Watt PSU
mushkin 12 GB DDRx 1600 cool looking black heatsink ram
About me briefly ive built 2 computers myself but my knowledge and problem solving ability may be limited.
My current desktop still runs (e6750 c2d, gtx 470,xp, dual raptors) So Ive been trying to use it to help diagnose.
PROBLEM : No Boot. Monitor stays in stand by and says No signal input. All fans on and turning incl mobo and gpu. i do NOT know if the drives are formatted etc although it was advertised as w7 ultimate.
here is a list of My observations and what i have done to try and solve the non boot issue.
1. Tried all display outputs (both hdmi and mini display port and both Dvi .
2. tried connecting boot drive from old computer to sata port 1 and booting. nothing on screen.
3. Installed 6970 into old computer and I get boot up stuff and blue screen Im guessing from driver issues but I believe i can rule GPU out as there is stuff showing now.
My questions for you guys are what steps would you take first? I was thinking to try another pci slot first.. then the boot drive and gtx470 from my current system onto the new mobo.
I will be trying a fresh install of w7 on the ssd. Is there a sata slot that the primary drive should be connected to? Ill bd d/l'ing the manual on the p6t too.
thanks.
i7-920
Asus P6TD-Deluxe Mobo
Corsair sata 3 120gb SSD (assuming was the boot drive)
1.5 TB WD 7200 rpm HDD
AMD 6970 2GB GPU
BFG 900 Watt PSU
mushkin 12 GB DDRx 1600 cool looking black heatsink ram
About me briefly ive built 2 computers myself but my knowledge and problem solving ability may be limited.
My current desktop still runs (e6750 c2d, gtx 470,xp, dual raptors) So Ive been trying to use it to help diagnose.
PROBLEM : No Boot. Monitor stays in stand by and says No signal input. All fans on and turning incl mobo and gpu. i do NOT know if the drives are formatted etc although it was advertised as w7 ultimate.
here is a list of My observations and what i have done to try and solve the non boot issue.
1. Tried all display outputs (both hdmi and mini display port and both Dvi .
2. tried connecting boot drive from old computer to sata port 1 and booting. nothing on screen.
3. Installed 6970 into old computer and I get boot up stuff and blue screen Im guessing from driver issues but I believe i can rule GPU out as there is stuff showing now.
My questions for you guys are what steps would you take first? I was thinking to try another pci slot first.. then the boot drive and gtx470 from my current system onto the new mobo.
I will be trying a fresh install of w7 on the ssd. Is there a sata slot that the primary drive should be connected to? Ill bd d/l'ing the manual on the p6t too.
thanks.