G
Guest
Guest
Hello everyone and thanks in advance for helping,
I searched a lot across various sites for a solution to my problem, consulted several stickies but it seems i still miss a solution.
Some infos about my rig.
1. X48T-DQ6 rev 1.3 bios version F5
2. Intel E8600 3.33Ghz
3. 2x2GB DDR3 7-7-7-20 (1600 - Patriot - 1.9V)
4. Sapphire 4870 512MB
5. 2xVelociraptor 300GB
6. 850W PSU
My major problem is that bios sets my E8600 CPU @ 3.2GHZ , that is actually lower than stock GHZ (8x400 instead of 10x333) and doesn't allow me to either change CPU clock ratio or FSB ( CPU clock ratio , Fine CPU clock ratio, CPU Host Contol, CPU Host Frequency are all locked).
C1E and EIST are both disabled
How can i make the bios correctly setup my cpu and is there a way i can unlock Cpu clock ratio and FSB ?
I would appriciate any kind of help and sorry if i missed some potential answer on a different post or stickie.
I searched a lot across various sites for a solution to my problem, consulted several stickies but it seems i still miss a solution.
Some infos about my rig.
1. X48T-DQ6 rev 1.3 bios version F5
2. Intel E8600 3.33Ghz
3. 2x2GB DDR3 7-7-7-20 (1600 - Patriot - 1.9V)
4. Sapphire 4870 512MB
5. 2xVelociraptor 300GB
6. 850W PSU
My major problem is that bios sets my E8600 CPU @ 3.2GHZ , that is actually lower than stock GHZ (8x400 instead of 10x333) and doesn't allow me to either change CPU clock ratio or FSB ( CPU clock ratio , Fine CPU clock ratio, CPU Host Contol, CPU Host Frequency are all locked).
C1E and EIST are both disabled
How can i make the bios correctly setup my cpu and is there a way i can unlock Cpu clock ratio and FSB ?
I would appriciate any kind of help and sorry if i missed some potential answer on a different post or stickie.