So I’ve been collecting parts over time to build my first pc. I’ve acquired all the parts, and just the other day I installed everything, and I turned it on. Nothing displayed when I turned it on, and my keyboard didn’t light up. The EZ LED debug lights flash quickly (with a white light on all) CPU first, then all at once and very quickly, they flash DRAM, VGA, and BOOT. After that it stays steady at CPU. I’ve checked all of my connections, and they were all connected properly. I’m certain that the board has power because all of the fans are on, and when I plug in my usb drive into any usb slot, it will flash it’s color momentarily, however it doesn’t stay lit. I’ve tried using one stick of ram, booting without my graphics card, and today I’ve checked my cpu to see if I’ve bent any pins. No pins were bent when I took it out. I’m currently waiting to reinstall the cpu and apply thermal paste because I want to determine my next step. I can apply additional information as needed. Any advice would be greatly appreciated.