Hi, I am a first time builder swapping over from playing on a 1060 Laptop.
I received my parts today and put everything together with relative ease. When I plugged in my boot USB drive to install windows 10 it kept crashing during the install. Sometimes 10 seconds in, other times 1 min in. Finally, I plugged the SSD into my laptop and installed windows 100% easy, no problems. I plugged the SSD back into my desktop and now it keeps crashing on the login screen, which is about 3 seconds after startup.
I assume this is a hardware issue on the motherboard, ram or CPU. Please help with any ideas you might have, I am a first time builder so I could have missed something important.
Specs:
Motherboard: Aorus Z390 Pro
CPU: I7-9700K
Ram: 32gb Corsair Vengeance White 3rgb 3200mhz
PSU: 850W Corsair RM850X White.
SSD: 1TB Samsung NVME M.2
GPU: Not installed yet, only coming with next months salary.
Please help.
I received my parts today and put everything together with relative ease. When I plugged in my boot USB drive to install windows 10 it kept crashing during the install. Sometimes 10 seconds in, other times 1 min in. Finally, I plugged the SSD into my laptop and installed windows 100% easy, no problems. I plugged the SSD back into my desktop and now it keeps crashing on the login screen, which is about 3 seconds after startup.
I assume this is a hardware issue on the motherboard, ram or CPU. Please help with any ideas you might have, I am a first time builder so I could have missed something important.
Specs:
Motherboard: Aorus Z390 Pro
CPU: I7-9700K
Ram: 32gb Corsair Vengeance White 3rgb 3200mhz
PSU: 850W Corsair RM850X White.
SSD: 1TB Samsung NVME M.2
GPU: Not installed yet, only coming with next months salary.
Please help.