Newly built PC not loading

[PressJProductions]

I recently bought all the parts for a Gaming PC including:

AMD Ryzen 5 1500x
ASUS Prime B350-Plus
Gigabyte GeForce GTX 1050TI
TP-Link N900 Wireless Dual Band PCI Express Adapter
Western Digital 1TB HDD
Corsair VS450 ATX Power Supply

I have built the PC however I'm having problems starting it up. I'm connecting the PC to a TV via a HDMI cable however, the screen tells me that there is no signal. I have litterally just put this together and it is not working. One noticable problem is that the graphics card's fans spin for a short amount of time, before stopping however all the other fans keep spinning. I am assuming that the graphics card is to blame however I have no idea if anything else is broken or needs to be wired up to run the machine. I'm really new to doing this so it would be great if anyone could help.

 

[dotas1]

If you have all the power cables connected to EVERY slot then the GPU is the problem. If possible, try it in another system to see if it works. If not, RMA it.

 

[PressJProductions]

If you have all the power cables connected to EVERY slot then the GPU is the problem. If possible, try it in another system to see if it works. If not, RMA it.

There are many spare power cables that I can put it, its just whether or not they are needed. Ill go through and see if i can connect any more needed power cables.

 

[mdd1963]

Confirm your HDMI cable is connected to a GPU output, and not to one of the non-functional mainboard outputs?

Disconnect everything not required for a simple POST display, i.e., all SATA cables, all drive power, etc., remove wireless adapter, no printers, etc., and drop to a single RAM stick in required slot per your MB manual....

With power removed, clear CMOS with switch or jumer (temp install jumper only!)

retest....

Your PSU wattage is not about to win any confidence awards, either....

 

[PressJProductions]

Ok. I've fixed the problem now by checking the GPU and RAM and now I get a picture on the screen. Thanks for all the help 😀