I have a system running Windows 7 64 bit and a set of Logitech z5500 speakers. Originally I was using a Creative X-Fi Titanium Fata1ity board. In XP I was able to get surround sound. When I switched to Win 7, the surround sound stopped working. Sometimes it would test as working in the sound app in the control panel and sometimes it wouldn't. Sometimes I could fix it by reinstalling the board's driver, but it always stopped again over time. Generally I had to make do with a front R/L/C system and the subwoofer.
After googling the issue extensively, I finally decided that the problem was some unidentified conflict between the Creative card and Win 7. So I researched sound cards and finally settled on an Asus Xonar ST with an H6 card. I hooked the system up via a setup that looked like the chart here: http://www.head-fi.org/forum/thread/513895/asus-xonar-essence-st-with-asus-xonar-h6-extension-card-logitech-z-5500-digital-5-1-speaker-system. However, now all the sound comes out of the front R/L/C--and no subwoofer!
I would appreciate any suggestions about how to rewire/fix this. Barring that, I'd appreciate suggestions about any (non-Logitech) surround speakers, as I guess that's the next thing to try.
Thanks tons!
After googling the issue extensively, I finally decided that the problem was some unidentified conflict between the Creative card and Win 7. So I researched sound cards and finally settled on an Asus Xonar ST with an H6 card. I hooked the system up via a setup that looked like the chart here: http://www.head-fi.org/forum/thread/513895/asus-xonar-essence-st-with-asus-xonar-h6-extension-card-logitech-z-5500-digital-5-1-speaker-system. However, now all the sound comes out of the front R/L/C--and no subwoofer!
I would appreciate any suggestions about how to rewire/fix this. Barring that, I'd appreciate suggestions about any (non-Logitech) surround speakers, as I guess that's the next thing to try.
Thanks tons!