no beeps even without ram

[mohamedes691]

So today i turned my pc off and when i came back to turn it on it turned on just fine...but the screen said "no signal".
so i did checked the rams and i get no beeps even without ram but when i remove cpu it gives me beeps.
So i really need to check if the motherboard still alive or not and detect exaclly where is the issue. All the Fans are running.
i did tried two diffrent gpus to make sure of it.
Specs: HP Z400
Xeon w3565
Ram 6gb
Quadro 2000
Psu 475 watts wide-ranging, active Power Factor Correction, 85% Efficient
Os win 10

 

[Ralston18]

"No signal" is from the monitor/display.

Have you tried another known working cable between PC and monitor?

Check that the GPU is fully and firmly seated.

Try the motherboard's built in display port(s)

Downloand, reinstall, and reconfigure GPU drivers via the manufacturer's website.

 

[mohamedes691]

I did tried my PC on another monitor with another câble but still giving me no signal

 

[Ralston18]

Update your post to include full system specs and OS.

Especially PSU.

Have you tried using the motherboard's built in video port?

 

[mohamedes691]

no i haven't tried because it doesn't have one.

 

[Phillip Corcoran]

Have you tried using the motherboard's built in video port?

That's not an option with the Xeon W3565, it doesn't incorporate a graphics processor.
https://ark.intel.com/products/39721/Intel-Xeon-Processor-W3565-8M-Cache-3-20-GHz-4-80-GT-s-Intel-QPI-

 

[Ralston18]

Without an incorporated graphics processor (Thank you @ PC) then the next option is to see if you can borrow a GPU from a family member or friend.

Do not be concerned about the "playing" specs per se. You just need to demonstrate that another GPU does work in place of the existing Quadro 2000.

And I am wondering about that 475 watt PSU. Make, model, age, condition....?

 

[mohamedes691]

Without an incorporated graphics processor (Thank you @ PC) then the next option is to see if you can borrow a GPU from a family member or friend.

Do not be concerned about the "playing" specs per se. You just need to demonstrate that another GPU does work in place of the existing Quadro 2000.

And I am wondering about that 475 watt PSU. Make, model, age, condition....?

gtx 1050 ti It did not work as well

 

[Ralston18]

Two GPUs not working.

Narrowing down to motherboard or PSU....

 

[mohamedes691]

Two GPUs not working.

Narrowing down to motherboard or PSU....

if it the motherboard how can you explain those beeps when i remove the Cpu

 

[Ralston18]

Check the motherboard's User Guide/Manual.

In the troubleshooting section there should be some table or list of the "beep" codes and what they mean.

What beep code do you hear and what meaning is listed in the User Guide/Manual?

 

[mohamedes691]

Check the motherboard's User Guide/Manual.

In the troubleshooting section there should be some table or list of the "beep" codes and what they mean.

What beep code do you hear and what meaning is listed in the User Guide/Manual?

3 beeps and this indicates that the processor is not installed.

 

[Ralston18]

By "processor" you mean the CPU - correct?

Try reinstalling the CPU.

 

[mohamedes691]

By "processor" you mean the CPU - correct?

Try reinstalling the CPU.

processor=cpu.
i will buy a new one.

 

[Ralston18]

Before you open the new CPU ensure that the existing CPU is properly installed and cooled.

Worth a try....

 

[mohamedes691]

Before you open the new CPU ensure that the existing CPU is properly installed and cooled.

Worth a try....

I have already tried it. I suspect that the problem from Cpu.
Thank you so much, you've been very helpful.