no beeps even without ram

Feb 5, 2019
24
0
10
So today i turned my pc off and when i came back to turn it on it turned on just fine...but the screen said "no signal".
so i did checked the rams and i get no beeps even without ram but when i remove cpu it gives me beeps.
So i really need to check if the motherboard still alive or not and detect exaclly where is the issue. All the Fans are running.
i did tried two diffrent gpus to make sure of it.
Specs: HP Z400
Xeon w3565
Ram 6gb
Quadro 2000
Psu 475 watts wide-ranging, active Power Factor Correction, 85% Efficient
Os win 10
 

Ralston18

Titan
Moderator
"No signal" is from the monitor/display.

Have you tried another known working cable between PC and monitor?

Check that the GPU is fully and firmly seated.

Try the motherboard's built in display port(s)

Downloand, reinstall, and reconfigure GPU drivers via the manufacturer's website.
 

Ralston18

Titan
Moderator
Without an incorporated graphics processor (Thank you @ PC) then the next option is to see if you can borrow a GPU from a family member or friend.

Do not be concerned about the "playing" specs per se. You just need to demonstrate that another GPU does work in place of the existing Quadro 2000.

And I am wondering about that 475 watt PSU. Make, model, age, condition....?

 
Feb 5, 2019
24
0
10



gtx 1050 ti It did not work as well