no boot asus ramapge gene iv and nvidia gtx 780 oc ii

[t0nil0]

Good morning everybody.
I have bought a pc by components and when i install all parts and i torn on the pc, while all the fans , and the leds of the pc turn on, there is no signal on the screnn.
The pc is made of
I74930k
32 gb ram
Asus ramapage gene iv
Nvidia gtx 780 dc ii oc
Corsair 750w power supply
Corsair h80i liquid cooling

Tips:
I plug the pc to the tv via hdmi because i dont have a dvi screen.

I install the gpu on the secendo pci express slot because there is no room for plug it on the first one.

When i torn on the system all then fans start to work at full speed for 5 seconds. After that the fans work slower.

When i turn on the system in the gpu are two little green leds so i think that it works properly.

Thank in advance and sorry for my bad english

 

[emdea22]

Get a motherboard pc speaker and lookup the beep code on the internet. It will tell you what doesn't work.

 

[t0nil0]

I did it and there was not sound. I will repeat it tonigh

 

[emdea22]

Borked motherboard then.

 

[t0nil0]

It was a bios problem. The first version of the bios doesnt support my cpu, so i have to change it via flash drive.
You have to download the latest bios, rename it with the new bios extension as R4G.CAP and copy it on the root of a pen drive.
Then with the computer off but conected to the current, connect the pen drive in the rog usb bus.
Press the rog button for three seconds. The button will start to blink as the motherboard reflash the bios. As process go on, the blinking is faster. Then when is finished the button turn off the light.
Turn on the computer and.... It works now. Problem solved

 

[ko888]

The ASUS Rampage IV Gene has Debug LEDs right on the motherboard. What is the two digit debug code that is displayed? Look up that code in the Debug table in the motherboard's user guide.

 

[t0nil0]

The ASUS Rampage IV Gene has Debug LEDs right on the motherboard. What is the two digit debug code that is displayed? Look up that code in the Debug table in the motherboard's user guide.

The code was "00".
As i posted yesterday, the problem is solved. Thank you everybody