Question No display after CPU change on Packard Bell Easynote TS11HR_517tk laptop

[EngereksizYilan]

My laptop is Packard Bell Easynote TS11HR_517tk. It had an i5 2450M processor and it wasn't enough for me. So I wanted to replace it and bought an i7 2670QM processor instead. I searched, the socket was also compatible, the chipset was also compatible. I installed the processor, all functions of the computer are working without any problems, the fan etc. is spinning, but there is no image on the screen. What should I do?

 

[rgd1101]

how do you know it working without image on the screen

 

[EngereksizYilan]

how do you know it working without image on the screen

I did not mean it. The fan is spinning and the lights are on but the BIOS won't start.

 

[EngereksizYilan]

https://www.userbenchmark.com/System/Packard-EasyNote-TS11HR/1456 this site says i7-2670QM is compatible with my computer.

 

[rgd1101]

check the video cable from the board to the monitor

 

[crazyal]

Probably needs a BIOS update first, looking on the driver download page for that model it does appear it's had bios updates pertaining to new CPU support.

https://imgur.com/a/Au4YaGR

Reinstall old CPU, boot up and grab the latest bios update from packard bells website, disable antivirus close all programs and flash it. Then reinstall new CPU and try.

 

[EngereksizYilan]

Probably needs a BIOS update first, looking on the driver download page for that model it does appear it's had bios updates pertaining to new CPU support.

https://imgur.com/a/Au4YaGR

Reinstall old CPU, boot up and grab the latest bios update from packard bells website, disable antivirus close all programs and flash it. Then reinstall new CPU and try.

Okay I'll try.

 

[EngereksizYilan]

It didn't work.