Hello everyone,
I just bought a new System and got a graphic card that is used but works. (worked today 1h before I got it)
I have the following components:
AsTock B450 pro4
Corsair Vengeance LPX (2x, 8GB, DDR4-3200, DIMM 288)
CPU AMD Ryzen 5 3600X/3800MHz, AM4
Netzteil Enermax MaxPro II, EMP500AGT-C
SSD Adata Flash SX8200 Pro, 512GB, M.2.2280
MSI GTX 1070
I put the 1070 into the PCIE2simce slot4 is off because of the M2
i started the system and everything was perfect. Bios was shown.
I grabbed a Win10 USB Stick. Booted aaand now display...
I tried it with one ram - same
DP instead of HDMI - same
I checked all the connections, removed bios battery, took gtx out and put it in again.
All same result.
I am going crazy.
anyone an idea or a tip where to start.
thank you so much and regards
I just bought a new System and got a graphic card that is used but works. (worked today 1h before I got it)
I have the following components:
AsTock B450 pro4
Corsair Vengeance LPX (2x, 8GB, DDR4-3200, DIMM 288)
CPU AMD Ryzen 5 3600X/3800MHz, AM4
Netzteil Enermax MaxPro II, EMP500AGT-C
SSD Adata Flash SX8200 Pro, 512GB, M.2.2280
MSI GTX 1070
I put the 1070 into the PCIE2simce slot4 is off because of the M2
i started the system and everything was perfect. Bios was shown.
I grabbed a Win10 USB Stick. Booted aaand now display...
I tried it with one ram - same
DP instead of HDMI - same
I checked all the connections, removed bios battery, took gtx out and put it in again.
All same result.
I am going crazy.
anyone an idea or a tip where to start.
thank you so much and regards