Hello guys, i have the following problem:
Recently i bought another stick of ram same model with my previous one and after installing it the computer starts but there's no signal to the monitor.
My mobo has only 2 ram slots.
I tried:
- Running only 1 stick at a time - both sticks work when installed alone.
- Adding 0.05 voltage and higher to the ram still no change
- Reseating cpu and cpu cooler - nothing changed
- Running only 1 stick at a time but in the second slot - same issue, no signal
I will try to clear cmos to see what happens after i come from school.
My PC specs:
Mobo - MSI H81 P33
Cpu - i5 4460
Ram - 4gb hyperx fury blue 1600mhz and i bought a second one same model
Gpu - gtx 1060 3gb
EDIT: I reseted cmos but still the isue persists. I also cleaned the ram slots but still no change
Recently i bought another stick of ram same model with my previous one and after installing it the computer starts but there's no signal to the monitor.
My mobo has only 2 ram slots.
I tried:
- Running only 1 stick at a time - both sticks work when installed alone.
- Adding 0.05 voltage and higher to the ram still no change
- Reseating cpu and cpu cooler - nothing changed
- Running only 1 stick at a time but in the second slot - same issue, no signal
I will try to clear cmos to see what happens after i come from school.
My PC specs:
Mobo - MSI H81 P33
Cpu - i5 4460
Ram - 4gb hyperx fury blue 1600mhz and i bought a second one same model
Gpu - gtx 1060 3gb
EDIT: I reseted cmos but still the isue persists. I also cleaned the ram slots but still no change