No display and fans won't turn on

[Ragingcanuk]

I have power to my tower and motherboard light on motherboard is on and the light to the tower is on. I how ever dont have display and none of the fans have turned on. Pls help

 

[Hellfire13]

Try these steps...

http://www.tomshardware.com/faq/id-1893016/post-system-boot-video-output-troubleshooting-checklist.html

 

[Ragingcanuk]

Ty but I have already went over those steps

 

[Hellfire13]

Detach everything except your cpu/mobo/psu and 1stick of ram. We are looking for a post beep with 1 stick at a time iterchanging the slots and sticks to every possible combination. Do you get a post beep???
If not, try a difference psu. Report back here.

 

[Ragingcanuk]

Well no beeping but I don't own another psu I know for a fact that this psu works though. I just ed pulled it out of my old pcei today for this one

 

[The Paladin]

if you pull the PSU from another PC it doesn't mean that it will work with your current PC properly, what is brand/model of PSU, new MOBO and Video Card please.

 

[Hellfire13]

Then you need to manage it from somewhere. Friend/family. You also need to check with other sets of ram. If you cannot manage any substitutes, it would be a good idea to visist a professional store in your vicinity and let them test it. They wont charge much for testing, but you will get the idea.

 

[Hellfire13]

if you pull the PSU from another PC it doesn't mean that it will work with your current PC properly, what is brand/model of PSU, new MOBO and Video Card please.

Ideally any psu having the right connectors and above the required wattage of the pc should work with any pc unless its a dead unit.

 

[The Paladin]

if you pull the PSU from another PC it doesn't mean that it will work with your current PC properly, what is brand/model of PSU, new MOBO and Video Card please.

Ideally any psu having the right connectors and above the required wattage of the pc should work with any pc unless its a dead unit.

"and above the required wattage " that is what I was inferring, it could be a 300w PSU trying to run an I5 with a 1060 for all we know.. Why I asked for more information...

 

[Ragingcanuk]

Mobo: z170x-gaming 7. Psu: cx 600. Video card: gtx 1060

 

[Hellfire13]

You need substitutes to test mate. Try to manage somehow and test before we go to the cpu/mobo level.

 

[Ragingcanuk]

I did inform you guys that I have power to the tower and that it turns on right? I just don't have display. I know I have power to tower because I can hook up my speakers and they light up. Also yea tomorrow I'll go to see a tech guy

 

[The Paladin]

yes indeed, but having no fan running is the primary concern, it means a power issue.

is this a new build ?

 

[Ragingcanuk]

Indeed it is

 

[The Paladin]

okay basic stupid questions, you connected the 24 pin to motherboard did you connect the 4/8 pin on as well ?

 

[Ragingcanuk]

Yep it's plugged in

 

[Hellfire13]

I did inform you guys that I have power to the tower and that it turns on right? I just don't have display. I know I have power to tower because I can hook up my speakers and they light up. Also yea tomorrow I'll go to see a tech guy

Well, considering your psu is working fine, the next possible issues could be either ram, mobo or cpu. But if either of those are faulty, you get multiple beeps...long, short, various combinations of them. But no beep is usually a power issue when its not sufficiently firing the mobo. Alternatively, your mobo could be dead as well. Because if it would have been cpu/ram issue, you would have got some sort of beep, unless you have one of those boards which comes without a hooter, which are very rare these days.
Can you mention your full specs in details???

 

[Ragingcanuk]

Intel core i7-6700k, gtx1060 one fan, z170x-gaming 7 motherboard. Cx 600psu. 2t hardrive (don't remember what brand) hyper X 2*8 memory. PHANTOM 410 case

 

[Hellfire13]

Is it cx only or cxm. The cx is not a very good unit.

 

[Ragingcanuk]

Cx

 

[Hellfire13]

Have you tried connecting to the igpu as well???
If not, then check whether you get a display from the motherboard.

 

[Ragingcanuk]

I unhooked my graphics card and plugged my hdmi cable into the motherboard but got no display.

 

[Hellfire13]

Well, unless you get a post beep, you wont get a display. There is only ram and psu test left to do before the motherboard or cpu can be deemed faulty, neither of which you have extra. At this stage it would be better to go to a professional store and let them test it with substitutes, unless you want to RMA straight away. Ideally a store should not charge you much, if at all anything, just for testing.