Question No display and no power to keyboard and mouse

[Marcellusmitchell]

Intel I7 12700k
Msi Pro B660M A-Wi-Fi DDR5
GIGABYTE GeForce RTX 3060
Msi Mag Core Liquid 240R
Corsair RMx Series 750x
Corsair Vengeance DDR5 2x16gb (32gb))

I recently built my Pc over the weekend and I put it altogether step by step. When done I plugged it into my monitor and my keyboard and mouse into the USB ports in the back. I turned it on and all fans work and there is power to the motherboard but no display and no power to my keyboard and mouse. I have made sure that all wires are in the correct spots and that all wires going to the PSU are inserted. There is a red light under the EZ Bug where is says CPU. In the manual it says that my CPU can’t be detected or failed. There are no bends on either the processor or the motherboard. I have no idea what’s going on any ideas?

 

[logainofhades]

Did you check for bent pins, within the socket? You didn't list what memory you have.

 

[Marcellusmitchell]

Did you check for bent pins, within the socket? You didn't list what memory you have.

Yes I checked for any vent pins anywhere on the motherboard and the processor. My memory is Corsair Vengeance 2x16gb DDR5 5600mhz