So I finally decided to replace my computer, and bought a bunch of parts from Newegg. Got the parts, built my computer, took awhile, when it was finally finished, I could turn it on, all LED lights, fans, everything ran fine with no beeps or anything, but there would be absolutely no display, monitors telling me there's no signal.
Specs are motherboard ASRock 970 Pro3 R2.0
Graphics card is Radeon HD 7870
CPU is AMD FX Quad core Black edition
8 GBs of RAM and Thermaltake Smart 750W
I get no beeps or notices that something is wrong, the computer sounds like it's starting up fine. At first I thought it was the card, so I tried many different ways of using it. Both connectors are always in, two 3x2 pin connectors. Tried both PCIe slots, neither work and act the same. Even took the card out of my currently being replaced computer and tried using that, a GeForce 450, the problem still exists with no screen and the computer seeming to run fine. There are no onboard graphics, and no way to get into BIOS.
Any help here is greatly appreciated. I hope it's a small thing I over-looked, else I believe I have a faulty motherboard.
Specs are motherboard ASRock 970 Pro3 R2.0
Graphics card is Radeon HD 7870
CPU is AMD FX Quad core Black edition
8 GBs of RAM and Thermaltake Smart 750W
I get no beeps or notices that something is wrong, the computer sounds like it's starting up fine. At first I thought it was the card, so I tried many different ways of using it. Both connectors are always in, two 3x2 pin connectors. Tried both PCIe slots, neither work and act the same. Even took the card out of my currently being replaced computer and tried using that, a GeForce 450, the problem still exists with no screen and the computer seeming to run fine. There are no onboard graphics, and no way to get into BIOS.
Any help here is greatly appreciated. I hope it's a small thing I over-looked, else I believe I have a faulty motherboard.