No Display at first boot.

[Mutant_Guy]

My system when I power on It won't give display signal at first boot. But it seems like system is working. Because when I press the power button again it properly shutdown. When I start again it works normal. This no display at first time happening for last 3 days. So i have to power off and start to work again.

I have a GTX660 installed. This problem never existed before. I have windows 10 but since no display at all at first boot i don't think OS is relevant.

There is a HD4000 update in update history. When I click uninstall I don't find it in the list. I also can't see intel graphic adapter inside the Device manager as I'm using GTX660. May be I have to plug in to the motherboard and roll back the driver.

Regards
Mahi

 

[scout_03]

this intel hd 4000 is the onboard video chipset for the motherboard did you set the bios to read the gpu as first video device and the driver are the latest one for it .

 

[Mutant_Guy]

this intel hd 4000 is the onboard video chipset for the motherboard did you set the bios to read the gpu as first video device and the driver are the latest one for it .

It was Auto now I assigned to PCI express first. This didn't resolve the issue. I'm going to disable internal graphic altogether and see.

 

[scout_03]

you do not need to disable internal video chipset when you plug in a gpu system does it ,could you check this gtx 660 in another system also it need a 6 pins power cable from psu check this one if it is well connect to psu .

 

[Mutant_Guy]

you do not need to disable internal video chipset when you plug in a gpu system does it ,could you check this gtx 660 in another system also it need a 6 pins power cable from psu check this one if it is well connect to psu .

Yes I know. I think that update have screwed it.. I did system restore today.. I also disabled driver updates from windows. Lets see... All connections were ok. I was using this system for 3 years.

 

[scout_03]

do the update manualy so you will find the offender .

 

[scout_03]

do the update manualy one at the time so you will find the offender .