No display from R9 290

[blrobbins42]

I just upgraded my system with a new corsair 1200w psu and 3 r9 290s. Except I can't get any display out of the card. No beeps everything is plugged up correctly but there's no video output. I put my old gpu back into the motherboard and ran it with the new psu and surprise surprise, it doesn't work either. So I'm lost guys I could really use some help. It's gotta be something with the bios or board..

 

[Stormtrooper13]

I would plug your video output through your motherboard, and then go into devices and search for new devices. Select your GPU if it finds it and then you can restart with your output plugged into your 290. And make sure power is plugged into the gpu, which you probably already did. Hope this helps